ETC Congo Family v6.4.0 - Manual (Page 326)

324
Templates - Type LTP or HTP
Each parameter in a Template can be set to LTP (Latest Takes Precedence) or HTP
(Highest Takes Precedence).
• HTP8 is used for intensity parameters
• LTP8 is used for 8 bit parameters
• LTP16 is used for 16 bit parameters*
This is set in the Template Editor.
See
Device Templates - Editor .
*Observe that the DMX offset of a parameter has to be incremented by 2, if the previous
parameter is set to 16-bit resolution.
See
Device Templates - 16 bit Control