ETC Congo Family v6.4.0 - Manual (Page 742)

740
Main Playback - Manual Crossfades
Move the crossfaders from the down position to the up position to perform a manual
crossfade. When both reach the top position the crossfade is terminated and the next
sequence step is advanced.
General Facts
• Take over a timed fades manually.
• Press GO during a manual fade.
• Set the crossfaders to fade in both directions in the Settings for the Playback (Hold
SETUP and press PLAYBACK).
• When you make a manual crossfade to a step with attributes, the attribute values
that are GoOnGo will follow the movement of the B-fader.
• You can record the actual manual movement of the crossfaders using a Crossfade
Profile. See Sequences - Crossfade Profiles (6.0)