ETC Congo Family v6.4.0 - Manual (Page 569)

567
Device Control - Highlight Mode (6.0)
Highlight is a temporary mode. It will set all intensity channels to the ID level in Congo
Settings (default 100%) and all device channels to the values defined in their templates,
with the highlighted device to white.
Action Key Feedback
Activate Highlight [HIGHLIGHT] All channels in the current selection
are highlighted. The LED in the key is
lit.Highlight is indicated at the top of
the screens
Step forward [NEXT] Channels are focused, and
Highlighted in the order they were
selected.
Step backwards [LAST] Channels are focused, and
Highlighted in the order they were
selected.
Leave Highlight
mode [HIGHLIGHT] Highlight mode is deactivated. The
LED in the key is off. All Devices
return to their last CB values.
NOTE
Highlighted Intensity channels are indicated in the channel views
with a highlighted background.