ETC Congo Family v6.4.0 - Manual (Page 774)

772
Master single field editor (6.1)
You can open a single field master editor for channel intensities by holding MODIFY and
pressing the Master key. All channel functions plus UPDATE are available.
NOTE
Adjustments made in this field are live if the master's fader is above
zero. When there is an unsaved change the grey title bar will be
purple and you will get an option of saving before closing or leaving
this tab (6.1)
To edit attributes in this tab, press ATTRIB. Editing Attributes opens the Preset Attribute
Editor tab. Edits to attributes are blind, and the fader must be brought to zero before those
changes will appear on the master.
Select channels in a master
Press a Master key to select all channels in the Ch, Preset, Effect or Group of that Master.
Function Keys Feedback
Select channels [Master_Key] All channels in Master #
are selected in the
Channel Control.
Select channels in with a
level [ALL] &
[Master_Key] All channels in Master #
with a level in the
Channel Control are
selected.
Add channels [+] & [Master_Key] All channels in Master #
are added to the
selection in the Channel
Control.
Subtract channels [-] & [Master_Key] All channels in Master #
are subtracted from the
selection in the Channel
Control.