ETC Congo Family v6.4.0 - Manual (Page 843)

841
Console Key - @LEVEL
This key is used to set levels to channels. It can also be used in combination with other keys
for specific level functions.
• [#] [@LEVEL] - Set level # to the currently selected channels.
• [@LEVEL] = 70%
• [@LEVEL] [@LEVEL] = 100%
• [@LEVEL] [@LEVEL] [@LEVEL] = 0%
• [CH] & [@LEVEL] - Sets a temporary ID level 0-100% to the currently selected
channels.
• [SETUP] & [@LEVEL] - Opens the level settings.
• [ON/FETCH]&[@LEVEL] - Revert (undo) changes to channel level.
NOTE
If the console is set to operate in At Mode this key has a slightly different syntax. See
Channels - Command Syntax .
For more information see Set Channel levels .
Keyboard equivalent: [+]
Console Key - A
Opens the channel view for the A field of the Main Playback. The channel control will be
connected to the A field.
• [A] - Opens and selects the A tab.
• [TIME] & [A] - Forces the setting "Times to A"
For more information see Main Playback - Edit Keys .
Keyboard equivalent: [A]
Console Key - ALIGN
This key is used to align device parameters to the one currently selected with NEXT/LAST.
• [ALIGN] & [parameter key] (CYAN, or FOCUS for example) - Aligns these
parameters.
For more information see Device Control - Align .
Keyboard equivalent: [Alt] & [A]