Rockwell Automation 1397 DC Drive Firmware 2.xx User Manual
Page 127
5–17
Programming Parameters
Publication 1397-5.0 — June, 2001
METERING
[Jog Ramp Output] — P.012
An output that represents the jog reference
value immediately after the jog ramp function.
Display/Drive Units:
RPM
Group:
Metering
Type:
Read Only
Factory Default:
0
Minimum Value:
–5000
Maximum Value:
5000
[Monitor 1 Output] — P.013
Shows the present state of the respective
monitor (On, Off).
Display/Drive Units:
Enum Text
Group:
Metering
Factory Default:
0
Minimum Value:
0 (Off)
Maximum Value:
1 (On)
[Monitor 2 Output] — P.014
Shows the present state of the respective
monitor (On, Off).
Display/Drive Units:
Enum Text
Group:
Metering
Factory Default:
0
Minimum Value:
0 (Off)
Maximum Value:
1 (On)
[MOP Output] — P.015
The output of the motor operated
potentiometer (MOP).
Refer to the [MOP Accel Time] input
parameter and block diagram for additional
information.
Display/Drive Units:
RPM
Group:
Metering
Parameter Type:
Read Only
Factory Default:
0
Minimum Value:
–5000
Maximum Value:
5000