Rockwell Automation 1397 DC Drive Firmware 2.xx - Manual (Page 186)

5–76 Programming Parameters
Publication 1397-5.0 — June, 2001
OWNERS
[Jog Owner] — P.217
This parameter displays which adapters are
presently issuing a valid jog command. Display/Drive Units: Numeric/Text
Parameter Range: Bit # Enum Text
0 = Terminal Block
1 = Adapter 1
2 = Adapter 2
3 = Adapter 3
4 = Adapter 4
5 = Adapter 5
6 = Adapter 6
Parameter Type: Read Only
Group: Owners
Minimum Value: 0000000000000000
Factory Default: 0000000000000000
Maximum Value: 0000000001111111
[Reference Owner] — P.218
Shows current reference owner. Display/Drive Units: Numeric/Text
Parameter Range: Bit # Enum Text
0 = Terminal Block
1 = Adapter 1
2 = Adapter 2
3 = Adapter 3
4 = Adapter 4
5 = Adapter 5
6 = Adapter 6
Parameter Type: Read Only
Group: Owners
Minimum Value: 0000000000000000
Factory Default: 0000000000000000
Maximum Value: 0000000001111111