Rockwell Automation 1397 DC Drive Firmware 2.xx User Manual
Page 195
5–85
Programming Parameters
Publication 1397-5.0 — June, 2001
Process Display
[Process 2 Text 1] — P.259
Sets the “User Units” description for the value
determined by [Process 2 Par] and [Process 2
Scale]. The 8 character description will be
shown on line 2 of the display.
Display/Drive Units:
Numeric/Text
Parameter Range:
Alphanumeric
Parameter Type:
Read & Write
Group:
Process Display
Minimum Value:
32
Factory Default:
65
Maximum Value
127
[Process 2 Text 2] — P.260
Sets the “User Units” description for the value
determined by [Process 2 Par] and [Process 2
Scale]. The 8 character description will be
shown on line 2 of the display.
Display/Drive Units:
Numeric/Text
Parameter Range:
Alphanumeric
Parameter Type:
Read & Write
Group:
Process Display
Minimum Value:
32
Factory Default:
109
Maximum Value
127
[Process 2 Text 3] — P.261
Sets the “User Units” description for the value
determined by [Process 2 Par] and [Process 2
Scale]. The 8 character description will be
shown on line 2 of the display.
Display/Drive Units:
Numeric/Text
Parameter Range:
Alphanumeric
Parameter Type:
Read & Write
Group:
Process Display
Minimum Value:
32
Factory Default:
112
Maximum Value
127
[Process 2 Text 4] — P.262
Sets the “User Units” description for the value
determined by [Process 2 Par] and [Process 2
Scale]. The 8 character description will be
shown on line 2 of the display.
Display/Drive Units:
Numeric/Text
Parameter Range:
Alphanumeric
Parameter Type:
Read & Write
Group:
Process Display
Minimum Value:
32
Factory Default:
115
Maximum Value
127