Rockwell Automation 1397 DC Drive Firmware 2.xx User Manual
Page 194
5–84
Programming Parameters
Publication 1397-5.0 — June, 2001
Process Display
[Process 1 Text 7] — P.255
Sets the “User Units” description for the value
determined by [Process 1 Par] and [Process 1
Scale]. The 8 character description will be
shown on line 1 of the display.
Display/Drive Units:
Numeric/Text
Parameter Range:
Alphanumeric
Parameter Type:
Read & Write
Group:
Process Display
Minimum Value:
32
Factory Default:
32
Maximum Value:
127
[Process 1 Text 8] — P.256
Sets the “User Units” description for the value
determined by [Process 1 Par] and [Process 1
Scale]. The 8 character description will be
shown on line 1 of the display.
Display/Drive Units:
Numeric/Text
Parameter Range:
Alphanumeric
Parameter Type:
Read & Write
Group:
Process Display
Minimum Value:
32
Factory Default:
32
Maximum Value:
127
[Process 2 Par] — P.257
This parameter should be set to the number
of the parameter whose scaled value will be
displayed on Line 2 of the HIM Display Panel.
Display/Drive Units:
Numeric/Text
Parameter Range:
Alphanumeric
Parameter Type:
Read & Write
Group:
Process Display
Minimum Value:
0
Factory Default:
6
Maximum Value:
308
[Process 2 Scale] — P.258
This value sets the scaling multiplier for
[Process 2 Par].
Display/Drive Units:
Numeric/Text
Parameter Range:
–3127.69 – +327.68
Parameter Type:
Read & Write
Group:
Process Display
Minimum Value:
–32768
Factory Default:
100
Maximum Value
32767