Rockwell Automation 1397 DC Drive Firmware 2.xx - Manual (Page 20)

2–2 Installation
Publication 1397-5.0 — June, 2001
In order to maintain proper cooling, the Drive must be mounted in a
vertical position. Refer to Figure 2.1 for the recommended minimum
clearance of each Drive.
The Drive design produces up to a 10
°C or 18°F air temperature rise
when the Drive is operated at full capacity. Precautions should be
taken not to exceed the maximum inlet ambient air temperature of
55
°C (131°F). If the Drive is in an enclosed cabinet, air circulation
fans or a closed circuit heat exchanger may be required.
For information on installing, wiring and grounding Line Filters used
in CE compliant applications, refer to Appendix B.
For installation information on AC Line Inductors used in CE
compliant applications, refer to Appendix B.
Cooling Airflow
Line Filters (CE Only)
AC Line Inductors (CE Only)