Options – Rockwell Automation 1397 DC Drive Firmware 2.xx User Manual

Page 18

Advertising

1–10

Introduction

Publication 1397-5.0 — June, 2001

ББББББББББ

Name

БББББББББББББББ

Description

БББББ

I/M Number

ББББББББББ

115 V AC Control Interface
All Horsepowers

БББББББББББББББ

Converts customer-supplied 115 V AC signals to 24 V DC for operating a
1397. Mounts separately on the panel or can be mounted in the bottom
of a NEMA Type 1 enclosed drive.

БББББ

1397-5.18

ББББББББББ

230 V AC Conversion

БББББББББББББББ

Allows conversion of the 460 V AC 1397 to a 230 V AC 1397 at one-half
the 460 V AC horsepower rating.

БББББ

1397-5.16

ББББББББББ

Б БББББББББ

ББББББББББ

A-C Line Disconnect
3 – 60 HP @ 460V
1 – 30HP @ 230V
7 – 100A @ 380/415VAC

БББББББББББББББ

Б ББББББББББББББ

БББББББББББББББ

Allows the three-phase line to be disconnected at the drive. Molded
case switch that mounts on the chassis of the drive or NEMA Type 1
enclosure.

БББББ

1397-5.11

ББББББББББ

Б БББББББББ

ББББББББББ

Dynamic Braking

БББББББББББББББ

Б ББББББББББББББ

БББББББББББББББ

Provides the hardware, including braking grids, needed to provide
dynamic braking on stop. Supplied in a NEMA Type 1 enclosure.

The 1397–DB–A and 1397–DB–B series allow the kit to be panel
mounted. These kits include the resistor grid assembly and contactor.
The customer must supply fused 115 V AC.

БББББ

1397-5.15

ББББББББББ

Enhanced Field Supply

БББББББББББББББ

Provides electronic field trim, field economy, and the ability to supply
240V field voltage and other special voltages. This kit replaces the
standard field supply.

БББББ

1397-5.24

ББББББББББ

Б БББББББББ

ББББББББББ

Regulated Field Supply
Supplied as standard on:
400 – 600HP @ 460V
150HP @ 460V
75 HP @ 230V and up
265 & 521 ADC @ 380/415 VAC

БББББББББББББББ

Б ББББББББББББББ

БББББББББББББББ

Provides field economy, as well as pre-weakening of the field using a
fixed reference or field weakening for above base speed operation.
Tachometer feedback is required with this kit. This kit replaces the
standard field supply.

БББББ

1397-5.17

ББББББББББ

Blower Motor Starter

БББББББББББББББ

Provides a fused A-C starter with adjustable overload and interlocking
for control of three phase blower motor used to cool the DC motor.

БББББ

1397-5.20

ББББББББББ

Expansion I/O Module

БББББББББББББББ

Mounts on the 1397 chassis and gives the drive additional analog,
frequency, and digital I/O capability.

БББББ

1397-5.19

ББББББББББ

Pulse Encoder Interface Card
All Horsepowers

БББББББББББББББ

Allows for digital pulse encoder speed feedback

БББББ

1397-5.13

ББББББББББ

AC Tachometer Interface Card
All Horsepowers

БББББББББББББББ

Allows for AC tachometer speed feedback

БББББ

1397-5.22

ББББББББББ

AC Line Disconnect
75 – 150 HP @ 460V
40 – 75 HP @ 230V

БББББББББББББББ

Allows the three phase line to be disconnected at the drive.

БББББ

1397-5.21

ББББББББББ

Б БББББББББ

ББББББББББ

AC Line Disconnect
200 – 300 HP @ 460V
100 – 150 HP @ 230V
521 ADC @ 380/415 VAC

БББББББББББББББ

Б ББББББББББББББ

БББББББББББББББ

Allows the three phase line to be disconnected at the drive.

БББББ

1397-5.27

ББББББББББ

Inverting Fault Circuit Breaker
400–600 HP

БББББББББББББББ

Allows high inertia loads on regenerative 1397 drives.

БББББ

1397-5.29

ББББББББББ

AC Line Disconnect
400 – 600 HP @ 460V

БББББББББББББББ

Allows the three phase line to be disconnected at the drive.

БББББ

1397-5.30

ББББББББББ

AC Line Filter Kit
600 HP @ 460V

БББББББББББББББ

Allows power transformer greater than 2300V RMS to be applied to the
drive.

БББББ

1397-5.31

ББББББББББ

Dynamic Braking Resistor Assembly
Lifting Instructions 250–600HP

БББББББББББББББ

Provides instructions for properly attaching and lifting Dynamic Braking
Kits.

БББББ

1397-5.32

Options

Advertising

Popular Brands

Popular manuals