Rockwell Automation 1397 DC Drive Firmware 2.xx - Manual (Page 69)

3–11 Programming Terminal
Publication 1397-5.0 — June, 2001
or
or
Save Values
1. To save values in the EEProm Mode:
A. Use the ESCape key if necessary to
reach the “Choose Mode” display.
B. Press the Increment (or Decrement) key
until “EEProm” is displayed.
C. Press Enter.
D. Press the Increment (or Decrement) key
until “Save Values” displayed.
E. Press Enter to save values.
Choose Mode
Display
Choose Mode
EEProm
EEProm
Save Values