Rockwell Automation 1397 DC Drive Firmware 2.xx User Manual
Page 60
3–2
Programming Terminal
Publication 1397-5.0 — June, 2001
Figure 3.2
HIM Front Panel
Key Descriptions
Descriptions of the keys used with the 1397 Drive are presented in the
following paragraphs.
Escape
When pressed, the ESCape key will cause the programming
system to go back one level in the menu tree.
Select
Pressing the SELect key alternately causes the top or bottom
line of the display to become active. The flashing first character
indicates which line is active.
Increment/Decrement
These keys are used to increment and decrement a
value or scroll through different groups or parameters.
Enter
When pressed, a group or parameter will be selected or a
parameter value will be entered into memory. After a parameter
has been entered into memory, the top line of the display will
automatically become active, allowing another parameter (or
group) to be chosen.