Rockwell Automation 1397 DC Drive Firmware 2.xx - Manual (Page 241)

CE Conformity B–9
Publication 1397-5.0 — June, 2001
Figure B.5
Termination of Shielded Cables using a Termination Fitting
Strip Outer Layer of ShieldĆ
ing as shown
Shielded Cable
Shielded Cable
Figure B.6
Termination of Shielded Cables using a Termination Bracket
Strip Outer Layer of
Shield as shown
Shielded
Cable
When using a conduit termination fitting to terminate the shield or
rigid conduit, the area around the entry hold must be free of paint
and protected from corrosion.