Rockwell Automation 1397 DC Drive Firmware 2.xx User Manual
Page 163
Advertising
5–53
Programming Parameters
Publication 1397-5.0 — June, 2001
OUTPUT CONFIG
[Anlg Out 1 Zero] — P.146
Removes any hardware-introduced offset
from the Analog 1 output signal at the
regulator board terminal strip.
Display/Drive Units:
Numeric
Parameter Type:
Tunable
Group:
Output Config
Factory Default:
0
Minimum Value:
–200
Maximum Value:
200
[Anlg Out 2 Gain] — P.147
Scales the Analog 2 Output Signal at the
regulator board terminal strip.
Display/Drive Units:
Numeric
Parameter Type:
Tunable
Group:
Output Config
Factory Default:
1.000
Minimum Value:
0.100
Maximum Value:
1.900
Advertising