Rockwell Automation 1397 DC Drive Firmware 2.xx - Manual (Page 21)

2–3 Installation
Publication 1397-5.0 — June, 2001
Enclosure Mounting Clearances
NO
T APPR
O
VED
Note: Do Not Mount
Drive Horizontally
on Side or Back.
Figure 2.1
Enclosure Mounting Minimum Clearances
1.5 – 30 HP @ 230VAC
3 – 60 HP @ 460VAC
7 – 110A @ 380 / 415 VAC 40 – 150 HP @ 230VAC
75 – 600 HP @ 460VAC
265A @ 380 / 415 VAC
A Leftside Clearance
B Rightside Clearance
C Drive to Drive Side Clearance
D Bottom Clearance
E Top Clearance 76 mm (3 in.)
51 mm (2 in.)
101 mm (4 in.)
127 mm (5 in.)
127 mm (5 in.)
76 mm (3 in.)
51 mm (2 in.)
101 mm (4 in.)
305 mm (12 in.)
305 mm (12 in.)
Approved Mounting Methods
All Dimensions Millimeters and (Inches)
D
A C B
E
D
E