Rockwell Automation 1397 DC Drive Firmware 2.xx - Manual (Page 71)

3–13 Programming Terminal
Publication 1397-5.0 — June, 2001
or
(continued) Control Status Mode
Fault Queue/Clear Faults
or
or
or
2. This menu provides a means to view the
fault queue and clear it when desired.
F. From the Control Status menu, press the
Increment (or Decrement) key until
“Fault Queue” is displayed.
G. Press Enter.
H. Press the Increment (or Decrement) key
until “View Faults” is displayed.
I. Press Enter. The fault queue will be
displayed. “Trip” displayed with a fault
will indicate the fault that tripped the
drive.
J. Use the Increment (or Decrement) key
to scroll through the list.
K. To clear the fault queue, press ESCape.
Then use the Increment/Decrement keys
to select “Clear Queue.” Press Enter.
Please note that “Clear Queue” will also
clear active fault conditions.
Control Status
Fault Queue
Fault Queue
View Faults
CAN Comm Lost
F 11 Trip 1
Motor Over Temp
F 07 2
Fault Queue
Clear Queue
or
Warning Queue/Clear Warning
or
3. This menu provides a means to view the
Warning queue and clear it when desired.
L. From the Control Status menu, press the
Increment (or Decrement) key until
“Warning Queue” is displayed.
M. Press Enter.
N. Press the Increment (or Decrement) key
until “View Warnings” is displayed.
O. Press Enter. The Warning queue will be
displayed. “Trip” displayed with a fault
will indicate the fault that tripped the
drive.
P. Use the Increment (or Decrement) key
to scroll through the list.
Q. To clear the Warning queue, press
ESCape. Then use the Inc/Dec keys to
select “Clear Queue.” Press Enter.
Please note that “Clear Queue” will also
clear active warning conditions.
Control Status
Warning Queue
Warning Queue
View Warnings
Brush Wear Low
W 01 1
Sustained Speed
W 32 2
Warning Queue
Clear Queue