Rockwell Automation 1397 DC Drive Firmware 2.xx User Manual
Page 160
Advertising
5–50
Programming Parameters
Publication 1397-5.0 — June, 2001
INPUT CONFIG
[Freq In Zero] — P.138
Only used if the I/O Expansion kit is installed.
Specifies the minimum input frequency. This
is the frequency that corresponds to a value
of zero. If the input frequency drops below
the frequency specified by this input
parameter, the resulting digital value remains
zero (it will not go negative).
Display/Drive Units:
kHz
Parameter Type:
Configurable
Group:
Input Config
Factory Default:
2.0 kHz
Minimum Value:
2.0 kHz
Maximum Value:
250.0 kHz
Advertising