Metrohm 751 GPD Titrino User Manual

Page 162

Advertising
background image

3.2 Remote control commands

751 GPD Titrino

159

List of the methods in the user method memory with the following characteris-
tics:
.Name:

Name of the method

.Mode:

Mode

.Quantity: Measured quantity
.DosUnit: Buret of the method
.Bytes:

Number of bytes of the user memory used by the method

.Checksum: Checksum of the method, see 3.2.2.133.

3.2.2.

3.2.2.80.

80. Me

MemoryCard.RRecall

$G

Me

MemoryCard.RRecall.NName

up to 8 ASCII characters

Me

MemoryCard.SStore

$G

Me

MemoryCard.SStore.NName

up to 8 ASCII characters

Me

MemoryCard.DDelete

$G

Me

MemoryCard.DDelete.NName

up to 8 ASCII characters

Administration of the method memory of the current directory of the memory
card: load, store and delete methods. The action is carried out, if "$G" is trans-
mitted to the corresponding node.
Do not use blank characters before and after method name!

3.2.2.

3.2.2.81.

81. Me

MemoryCard.CChangeDir

$G

Me

MemoryCard.CChangeDir.NName

up to 10 ASCII characters

Me

MemoryCard.CChangeDir.CChecksum

$G

Me

MemoryCard.CChangeDir.CChecksum.VValue

read only

Changing the current directory. The action is carried out if "$G" is transmitted to
the corresponding node.
Do not use blank characters before and after name!
The checksum characterizes the content of the directory.

3.2.2.

3.2.2.82.

82. Me

MemoryCard.Cr

CreateDir

$G

Me

MemoryCard.Cr

CreateDir.NName

up to 10 ASCII characters

Delete directory. The action is carried out if "$G" is transmitted to the corre-
sponding node.
Do not use blank characters before and after name!

3.2.2.

3.2.2.83.

83. Me

MemoryCard.DelD

DelDir

$G

Me

MemoryCard.DelD

DelDir.NName

up to 10 ASCII characters

Delete directory. The action is carried out if "$G" is transmitted to the corre-
sponding node.
Do not use blank characters before and after name!

3.2.2.

3.2.2.84.

84. Me

MemoryCard.BBackup

$G

Me

MemoryCard.BBackup.NName

up to 10 ASCII characters

Backup of the internal memory onto the card. The action is carried out if "$G" is
transmitted to the corresponding node.
Do not use blank characters before and after name!

Advertising