Metrohm 751 GPD Titrino - Manual (Page 216)

5.1 Setting up and connecting the instruments
751 GPD Titrino
213
5.1.7.2 Connecting a PC keyboard
PC keyboards with a 5-pole DIN plug can be connected to 6.2148.000 Remote Box. For
keyboards with a PS/2 plug an adapter PS/2
→ DIN is available in PC shops.
Settings at the Titrino:
Under key <CONFIG>, >peripheral units, "Remote Box: on"
Keyboard:
Select the country-specific keyboard layout of your PC keyboard.
If the Titrino does not support your keyboard you should select a keyboard which has the
closest possible layout (for example check the 2nd occupancy of the numerical keys).
Country-specific special characters will probably not be converted correctly.
Operating via a PC keyboard:
The Titrino can be operated from the PC keyboard. The Titrino functions are called up as
follows:
Titrino function Key combination
on PC keyboard Remarks
<C-FMLA> Alt F
<CAL.DATA> Alt C
<CARD> Alt M
<CLEAR> F5
<CONFIG> F10
Cursor ↑ ↓ Cursor ↑ ↓ Navigation
Cursor → ← Cursor → ← Selection of inputs
<DEF> Alt D
DEF: formula input, common
variable, mean value:
EP
RS
MN
C
E
R
M
C
Input of corresponding quantity or
variable together with the numeri-
cal address, e.g. R1 gives RS1.
<ENTER> enter
<MEAS/HOLD> F9
<MODE> F2
<PARAM> F11
<PREP> Alt E
<PRINT> Alt P Report selection with → ←
<QUIT> ESC
<REPORTS> Alt O Printout reports:
Alt P + Alt O
<SILO> F4 on/off
<SMPL DATA> F12
<START> F7
<STATISTICS> F6 on/off
<STOP> F8
<USER METH> F3
<USER> Alt U