Metrohm 751 GPD Titrino - Manual (Page 55)

2.6. Parameters, key <PARAM>
751 GPD Titrino
52
Stop times
Stop time: The stop time runs over the whole controlling time of the determination: It
starts after dosing of the start volume and after the pause:
The stop time can be absolute (in s) or relative to the sample size (time in s =
factor * smpl size).
t(delta): t(delta) starts after controlling point (EP) has been reached the first time.
t(delay): t(delay) can be used as "after reaction time". It starts after the last dosing
step, i.e. with every dosing, t(delay) will be restarted from zero.
V/ml
t/s
Last
dosing
Control point (EP)
reached the first time
t(delay)
t(delta)
stop time