Metrohm 751 GPD Titrino User Manual
Page 84
2.10 Data output
751 GPD Titrino
81
scalc full
Full report of silo calculations.
scalc srt
Short report of silo calculations.
param
Parameter report.
calc
Report with formulas and operands.
calib
Calibration data.
ff
Form feed on printer.
Original reports which are put out automatically at the end of the titration can be printed
with recalculated values at any time. Key sequence:
<PRINT><REPORTS><ENTER>.
Original reports have double dashes ==== at the end, whereas recalculations are
marked by single dashes ----.
Report outputs can be stopped with <QUIT>.
Example of reports:
Full result report
Card label if a card was inserted, see page
92.
Device label (if there is a designation) and
manual signature
Titration curve
Scaling of volume and pH axis
'fr
751 GPD Titrino 0P1/101 751.0020
date 1999-06-27 time 08:54 14
card label: Appl.751
pH(init) 2.88 DET pH ********
smpl size 0.372 g
EP1 2.083 ml 7.64
RS1 3.80 g/l
device label Titr 1 sign:
============
'cu
751 GPD Titrino 0P1/101 751.0020
date 1999-06-27 time 08:54 14
start V 0.000 ml DET pH ********
1.0 ml/div dpH=1.0/div
============