Software upgrade task list, Upgrading bootware – H3C Technologies H3C S12500 Series Switches User Manual
Page 119
107
Software upgrade task list
The system software image file (with the file extension .bin) comprises the BootWare image, MBUS
daughter card software, and power monitor software, which are automatically upgraded when the
system software image is upgraded. You can also upgrade the BootWare image, MBUS daughter card
software, and power monitor software separately.
To upgrade software from the CLI, perform the following tasks as appropriate:
Task Remarks
Optional.
Optional.
Optional.
Upgrading MBUS daughter card software
Optional.
Optional.
Upgrading or repairing the power software on an interface card
Optional.
Upgrading the power monitor software
Optional.
Upgrading fan monitor software
Optional.
Upgrading BootWare
The BootWare image is automatically upgraded when you upgrade the system software image. You can
also perform the tasks in this section to upgrade the BootWare image separately.
To upgrade the BootWare image on an MPU, save the upgrade file in the root directory of a storage
medium on the MPU.
To upgrade the BootWare image for an interface card or a switching fabric module:
•
In standalone mode—Save the upgrade file in the root directory of a storage medium on the active
MPU.
•
In IRF mode—Save the upgrade file in the root directory of a storage medium on the active MPU of
the member switch that hosts the card.
If the storage medium has been partitioned, save the upgrade file to the root directory of the first
partition.
Names of the BootWare image files on each MPU can be different, but their versions must be the same
for a correct startup.
In FIPS mode, the file must pass authenticity verification before it can be set as the BootWare image file.
After upgrading the BootWare image, you must restart the switch to validate the upgrade.
To upgrade the BootWare image on a card:
Task Command
Remarks
Upgrade the BootWare image on
a card (in standalone mode).
bootrom update file file-url slot
slot-number-list
Available in user view.