Switching the user privilege level – H3C Technologies H3C S12500 Series Switches User Manual
Page 31
19
Switching the user privilege level
Before switching to a higher user privilege level, obtain the required authentication data as described
in
.
When the level switching authentication mode is scheme, you have three opportunities to enter the
correct password for one switching operation.
When the level switching authentication mode is local, you have five opportunities to enter the correct
password for one switching operation. If you fail to provide the correct password during five consecutive
attempts, the switching operation fails. If the login authentication mode is scheme, you must wait 15
minutes before you can perform another switching operation.
To switch the user privilege level, perform the following task in user view:
Task Command
Remarks
Switch the user privilege level.
super [ level ]
When logging in to the switch, a
user has a user privilege level,
which depends on user interface or
authentication user level.
When you switch the user privilege level, the information you must provide varies with combinations of
the user interface authentication mode and the super authentication mode.
For more information about user interface authentication, see "Logging in to the CLI."
Table 8 Information required for user privilege level switching
User interface
authentication
mode
User privilege level
switching
authentication
mode
Information required for
the first authentication
mode
Information required for the
second authentication mode
none/password
local
Password configured for the
privilege level on the switch
with the super password
command
N/A
local scheme
Password configured for the
privilege level on the switch
with the super password
command
Username and password
configured on the AAA server for
the privilege level
scheme
Username and password for
the privilege level
N/A
scheme local
Username and password for
the privilege level
Local user privilege level
switching password.
scheme
local
Password configured for the
privilege level on the device
with the super password
command
N/A
local scheme
Password configured for the
privilege level on the device
with the super password
command
Password for privilege level
switching configured on the
AAA server. The system uses the
login username as the privilege
level switching username.