H3C Technologies H3C S12500 Series Switches - Manual (Page 231)

219
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9):
The BootWare upgrade is completed.
System software upgrade examples
You can upgrade the system software by using the BootWare menus, the ISSU feature (see "Performing
ISSU"), or the methods described in "Upgrading software." This section describes how to upgrade the
system software using the BootWare menus.
Using XMODEM to upgrade software through the console port
1. In the EXTEND-BOOTWARE menu, enter 2.
The Serial submenu appears:
===========================<Enter Serial SubMenu>==========================
|Note:the operating device is cfa0 |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Update User Private File |
|<6> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
==========================================================================
Enter your choice(0-6):
2. In the Serial submenu, enter 6.
===============================<BAUDRATE SET>=============================
|Note:'*'indicates the current baudrate |
| Change The HyperTerminal's Baudrate Accordingly |
|---------------------------<Baudrate Available>---------------------------|
|<1> 9600(Default)* |
|<2> 19200 |
|<3> 38400 |
|<4> 57600 |
|<5> 115200 |
|<0> Exit |
==========================================================================
Enter your choice(0-5):1
3. Select the correct download baud rate.
In this example, enter 1 to select 9600 bps.
4. Change the baud rate of your terminal to match that set on the Serial submenu, close your
connection to the device and then reestablish the connection to make the terminal's baud rate
change take effect, and press Enter.
The Serial submenu appears again: