Managing files, Displaying all files – H3C Technologies H3C S12500 Series Switches User Manual
Page 215
203
Managing files
CAUTION:
The private-data.txt file is automatically created by the system in the built-in flash for recording
configuration file information. If password recovery capability is disabled, you cannot delete or replace
the file. If the capability is enabled,
To change the type of a system software image, retrieve files, or delete files, enter 4 in the
EXTEND-BOOTWARE menu.
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> BootWare Operation Menu |
|<7> Clear Super Password |
|<8> Storage Device Operation |
|<9> Product Special Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9): 4
The following File Control submenu appears:
===============================<File CONTROL>=============================
|Note:the operating device is cfa0 |
|<1> Display All File(s) |
|<2> Set Application File type |
|<3> Delete File |
|<0> Exit To Main Menu |
==========================================================================
Enter your choice(0-3):
Displaying all files
To display all files on the current storage medium, enter
1 in the FILE CONTROL submenu:
Enter your choice(0-3): 1
Display all file(s) in cfa0:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
============================================================================
|NO. Size(B) Time Type Name |
|1 5602 Jun/03/2012 22:06:02 N/A cfa0:/test.cfg |
|2 4714356 Jun/03/2012 19:11:10 N/A cfa0:/logfile/logfile1.log |
|3 936158 Jun/03/2012 19:26:00 N/A cfa0:/diaglog/diagfile1.log |
|4 4196112 Jun/03/2012 14:59:16 N/A cfa0:/info.txt |
|5 53538808 Jun/03/2012 14:36:12 M cfa0:/s12500-test.bin |