Ftp server configuration example (irf mode), Network requirements, Configuration procedure – H3C Technologies H3C S12500 Series Switches User Manual
Page 90
78
The specified file will be used as the main boot file at the next reboot on slot
0!
{
For the standby MPU.
<Sysname> boot-loader file slot1#flash:/newest.bin slot 1 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot
1!
IMPORTANT:
The system software image file used for the next startup and the startup configuration file must be
saved in the root directory of the storage medium. If the storage medium is partitioned, they must be
saved in the first partition. You can copy or move a file to the Flash root directory.
# Reboot the device.
<Sysname> reboot
FTP server configuration example (IRF mode)
Network requirements
As shown in
, an IRF fabric comprises a master and a subordinate device. The member ID of the
master is 1, and the slot numbers of the active MPU and the standby MPU on the master are 0 and 1
respectively. The member ID of the subordinate device is 2, and the slot numbers of the active MPU and
standby MPU on the subordinate device are 0 and 1 respectively. The IRF fabric and the PC are
reachable to each other.
Use the IRF fabric serves as an FTP server, and create an FTP user account with the username abc and
password abc for the FTP client. From the IRF fabric, download a system software image file from PC for
upgrade, and uploads the configuration file to PC for backup.
Figure 30 Network diagram
Configuration procedure
1.
Configure the IRF fabric (FTP server):
# Examine the storage medium of the device for insufficiency or impairment. If no sufficient free
space is available, use the fixdisk command to fix the storage medium or use the
delete/unreserved file-url command to delete unused files. (Details not shown.)
# Create an FTP user account abc, set its password to abc and the user privilege level to level 3 (the
manage level). Allow user abc to access the root directory of the flash on the active MPU of the IRF
fabric, and specify abc to use FTP.