H3C Technologies H3C S12500 Series Switches User Manual
Page 233
221
Figure 65 File transfer progress
After the file transfer is complete, the Serial submenu appears again. You can choose other options
as required.
Using TFTP to upgrade system software through the Ethernet
interface
In this example, the device acts as the TFTP client.
1.
Connect the device to the intended TFTP server through the device's management Ethernet
interface and obtain the IP address of the intended TFTP server. Connect your terminal to the
device's console port.
You can use the same PC for the two purposes.
2.
On the intended TFTP server, run TFTP server and specify the working path for software upgrade.
3.
Run the terminal emulation program on the terminal, reboot the device, and enter the
EXTEND-BOOTWARE menu.
4.
In the EXTEND-BOOTWARE menu, enter 3.
==========================<Enter Ethernet SubMenu>=========================
|Note:the operating device is cfa0 |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Update User Private File |
|<6> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
==========================================================================
Enter your choice(0-6):6
5.
To download a file, enter 6 to modify Ethernet port settings.
==========================<ETHERNET PARAMETER SET>=========================
|Note: '.' = Clear field. |