Upgrading system software through the console port – H3C Technologies H3C S12500 Series Switches User Manual
Page 210
198
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
..............................................................
Done!
System application is starting...
Upgrading system software through the console port
You can upgrade the system software through the console port or modify the baud rate of the console
port from the Serial submenu.
To upgrade system software through the console port from the Serial submenu:
1.
Enter 2 in the EXTEND-BOOTWARE menu to access the Serial submenu.
===========================<Enter Serial SubMenu>==========================
|Note:the operating device is cfa0 |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Update User Private File |
|<6> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
==========================================================================
Enter your choice(0-6):
Table 24 Serial submenu options
Option Tasks
<1> Download Application Program To SDRAM And Run
Load and run a system software image in
SDRAM.
If password recovery capability is
disabled, this option is not available.
<2> Update Main Application File
Download a system software image to the
current storage medium as the main image
(the file attribute is set to M).
If a main system image already exists on
the storage medium, the M file attribute of
the original image is removed.