H3C Technologies H3C S12500 Series Switches - Manual (Page 82)

70
Task Command Remarks
Terminate the FTP connection without
exiting FTP client view.
• disconnect
• close
Use either command in FTP
client view.
Terminate the FTP connection and return
to user view.
• bye
• quit
Use either command in FTP
client view.
FTP client configuration example (standalone mode)
Network requirements
As shown in Figure 27 , Device and PC are reachable to each other. On PC, an FTP user account has been
created for the FTP client, with the username abc and the password abc.
From Device, download a system software image file from PC for upgrade, and upload the configuration
file to PC for backup.
Figure 27 Network diagram
Configuration procedure
# Examine the storage medium of the device for insufficiency or impairment. If no sufficient free space is
available, use the fixdisk command to fix the storage medium or use the delete/unreserved file-url
command to delete unused files. (Details not shown.)
# Log in to the server through FTP.
<Sysname> dir
Directory of flash:/
0 drw- - Dec 07 2008 10:00:57 filename
1 drw- - Jan 02 2008 14:27:51 logfile
2 -rw- 1216 Jan 02 2008 14:28:59 config.cfg
3 -rw- 1216 Jan 02 2008 16:27:26 backup.cfg
129794 KB total (127362 KB free)
<Sysname> delete /unreserved flash:/backup.cfg
# Download the system software image file from the FTP server.
<Sysname> ftp 10.1.1.1
Trying 10.1.1.1 ...
Press CTRL+K to abort
Connected to 10.1.1.1.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user