H3C Technologies H3C S12500 Series Switches - Manual (Page 220)

208
Enter your choice(0-4):
Table 29 BOOTWARE OPERATION ETHERNET submenu options
Option Task
<1> Update Full BootWare Upgrade the entire BootWare image.
<2> Update Extend BootWare Upgrade the extended segment.
<3> Update Basic BootWare Upgrade the basic segment.
<4> Modify Ethernet Parameter Configure the FTP or TFTP file transfer settings.
<0> Exit To Main Menu Return to the BootWare Operation menu.
Clearing the console login password
IMPORTANT:
•
To perform this task, make sure password recovery capability is enabled. If the capability is disabled,
you cannot perform this task.
• This is a one-time operation. The configuration takes effect only for the first system boot or reboot (option
1 and option 0 in the EXTEND-BOOTWARE menu) after you perform the operation. If you do not save
the running configuration, the original settings continue to take effect for the subsequent reboot.
If you cannot remember the console login password, enter 7 in the EXTEND-BOOTWARE menu to clear
the password, and then configure a new password and save the running configuration.
Enter your choice(0-9): 7
Clear Application Password Success!
For more information about the console login password, see "Logging in to the CLI."
Managing storage media
To get information about the storage media on the MPU you are working with, and set the storage
medium you want to use for file operations, enter 8 in the EXTEND-BOOTWARE menu.
Enter your choice(0-9): 8
The following DEVICE CONTROL menu appears:
==============================<DEVICE CONTROL>==============================
|<1> Display All Available Nonvolatile Storage Device(s) |
|<2> Set The Operating Device |
|<3> Set The Default Boot Device |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-3):
Table 30 DEVICE CONTROL menu options
Option Task
<1> Display All Available Nonvolatile Storage Device(s)
Display all storage media on the MPU you are
working with.