Network requirements – H3C Technologies H3C S12500 Series Switches User Manual
Page 157
145
Validating file. Please wait............................
The current configuration is saved to the active main board successfully.
Configuration is saved to device successfully.
[IRF] issu load file soft-version2.bin chassis 1 slot 1
This command will begin ISSU, and the specified board will reboot and be upgraded.
Please save the current running configuration first; otherwise, the configuration may
be lost.Continue? [Y/N]:y
# After the standby MPU reboots, perform an active and standby switchover and upgrade the
interface cards.
[IRF] issu run switchover chassis 1 slot 1
Master will reboot, switch the specified board to master and update the line card.
Continue? [Y/N]:y
# Accept the upgrade to the new global active MPU and interface cards.
[IRF] issu accept chassis 1 slot 1
# Upgrade other MPUs.
[IRF] issu commit chassis 1 slot 0
The specified board will reboot and be upgraded. Continue? [Y/N]:y
[IRF] issu commit chassis 2 slot 0
The specified board will reboot and be upgraded. Continue? [Y/N]:y
[IRF] issu commit chassis 2 slot 1
The specified board will reboot and be upgraded. Continue? [Y/N]:y
[IRF] issu commit chassis 3 slot 0
The specified board will reboot and be upgraded. Continue? [Y/N]:y
[IRF] issu commit chassis 3 slot 1
The specified board will reboot and be upgraded. Continue? [Y/N]:y
[IRF] issu commit chassis 4 slot 0
The specified board will reboot and be upgraded. Continue? [Y/N]:y
[IRF] issu commit chassis 4 slot 1
The specified board will reboot and be upgraded. Continue? [Y/N]:y
The ISSU upgrade process is completed and the software of the IRF fabric is upgraded to the new
version. No master and subordinate switchover occurred during the upgrade.
3.
Verify the configuration:
# During the ISSU upgrade process of the IRF fabric, ping the IRF fabric from the TFTP server. The
IRF fabric can be successfully pinged.
# After the upgrade is complete, verify whether the current system software image on the IRF fabric
is soft-version2.bin.
[IRF] display boot-loader
# Verify whether the current running version of the IRF fabric is the target version.
[IRF] display version
Member switch-based ISSU upgrade example
(compatible or partially compatible version)
Network requirements
As shown in
: