Logging in through cwmp from an acs – H3C Technologies H3C S12500 Series Switches User Manual
Page 60
48
Logging in through CWMP from an ACS
You can launch a browser on a PC to log in to an ACS, and use the server to access and manage CPE
through the CWMP.
CWMP is intended for management and configuration of home network devices in DSL access networks.
The H3C implementation of the ACS system is the IMC BIMS component, which runs on IMC Platform.
For more information about ACS and CWMP, see Network Management and Monitoring Configuration
Guide. For more information about IMC BIMS, see the IMC BIMS manuals.
To log in to an ACS running BIMS from a PC, follow these steps:
1.
Launch a browser on the PC.
2.
Enter http:// 0.185.10.41:8080/imc in the address bar (suppose that the ACS uses the IP
address 10.185.10.41 and the port 8080).
3.
Enter the login username and password, which are the same as those used for logging in to IMC.
When you log in to IMC for the first time, you can use the default account with the username admin and
password admin. Be sure to change the password immediately after login. For information about how to
change the password, see IMC manuals, such as H3C Intelligent Management Center Getting Started
Guide.
You can also add accounts with different rights for operators and perform other operations in the IMC
system. For more information, see IMC online help.