H3C Technologies H3C S12500 Series Switches User Manual
Page 214
202
Field Description
'-' = Go to previous field
Press the hyphen (-), and then press Enter to return to the previous
field.
Ctrl+D = Quit
Press Ctrl + D to exit the Ethernet parameter settings menu.
Protocol (FTP or TFTP)
Set the file transfer protocol to FTP or TFTP.
Load File Name
Set the name of the file to be downloaded.
Target File Name
Set a file name for saving the file in the current storage medium on
the device.
By default, the target file name is the same as the source file name.
Server IP Address
Set the IP address of the FTP or TFTP server. If a mask must be set,
use a colon (:) to separate the mask length from the IP address. For
example, 192.168.2.26:24.
Local IP Address
Set the IP address of the device.
Gateway IP Address
Set a gateway IP address if the device is on a different network
than the server.
FTP User Name
Set the username for accessing the FTP server. This username must
be the same as configured on the FTP server. This field is not
available for TFTP.
FTP User Password
Set the password for accessing the FTP server. This password must
be the same as configured on the FTP server. This field is not
available for TFTP.
3.
Choose an option from 1 to 5. For example, to upgrade the main system software image, enter 2.
==========================<Enter Ethernet SubMenu>=========================
|Note:the operating device is cfa0 |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Update User Private File |
|<6> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
==========================================================================
Enter your choice(0-6):2
Waiting ...CCC
Download successfully!
47979456 bytes downloaded!
Updating File cfa0:/test.bin..............................................
..........................................................................
..........................................................................
...............................................
..Done!
4.
Enter 0 in the Serial submenu to return to the EXTEND-BOOTWARE menu.
5.
Enter 1 in the EXTEND-BOOTWARE menu to run the new system software.