Configuration procedure, Enabling displaying the copyright statement – H3C Technologies H3C S12500 Series Switches User Manual
Page 172
160
Command Effective
system time
Configuration example System time
date-time in the daylight
saving time range, but
date-time – summer-offset
outside the summer-time
range:
date-time – summer-offset
clock timezone
zone-time add 1
clock summer-time ss
one-off 1:00
2008/1/1 1:00
2008/8/8 2
clock datetime 1:30
2008/1/1
23:30:00 zone-time Mon
12/31/2007.
Both date-time and
date-time – summer-offset
in the daylight saving time
range:
date-time
clock timezone
zone-time add 1
clock summer-time ss
one-off 1:00
2008/1/1 1:00
2008/8/8 2
clock datetime 3:00
2008/1/1
03:00:00 ss Tue
01/01/2008.
Configuration procedure
To change the system time:
Step Command
Remarks
1.
Set the time and date.
clock datetime time date
Optional.
Available in user view.
2.
Enter system view.
system-view
N/A
3.
Set the time zone.
clock timezone zone-name { add |
minus } zone-offset
Optional.
Universal time coordinated (UTC)
time zone by default.
4.
Set a daylight saving time
scheme.
•
Set a non-recurring scheme:
clock summer-time zone-name
one-off start-time start-date
end-time end-date add-time
•
Set a recurring scheme:
clock summer-time zone-name
repeating start-time start-date
end-time end-date add-time
Optional.
Use either command.
By default, daylight saving time is
disabled, and the UTC time zone
applies.
Enabling displaying the copyright statement
The device by default displays the copyright statement when a Telnet or SSH user logs in, or when a
console user quits user view. You can disable or enable the function as needed. The following is a sample
copyright statement:
**************************************************************************
* Copyright (c) 2004-2011 Hangzhou H3C Tech. Co., Ltd. All rights reserved.*
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
**************************************************************************