Entering system view, Returning to the upper-level view, Returning to user view from any view – H3C Technologies H3C S12500 Series Switches User Manual
Page 15: Figure 3
3
view to configure login user attributes, or create a local user and enter local user view to configure
attributes for the local user.
To display all commands available in a view, enter a question mark (?) at the view prompt.
Figure 3 CLI view hierarchy
Entering system view
Task Command
Remarks
Enter system view from user view. system-view
Available in user view.
Returning to the upper-level view
Task Command
Remarks
Return to the upper-level view from
any view.
quit
Available in any view.
Executing the quit command in user view terminates your connection to the switch.
NOTE:
In public key code view, use the public-key-code end command to return to the upper-level view (public
key view). In public key view, use the peer-public-key end command to return to system view.
Returning to user view from any view
You can return to user view from any other view by using the return command or pressing Ctrl+Z, instead
of using the quit command multiple times.
VLAN view
Interface
view
OSPF area
view
OSPF view
System
view
User view
User
interface
view
Local user
view