Power optional redlink™ accessories, Power optional redlink, Accessories – Honeywell PRESTIGE THX9321 User Manual
Page 14: Mount thermostat on wallplate, Outdoor air sensor, Portable comfort control, Indoor air sensor, Redlink™ internet gateway
THX9321 PRESTIGE
®
2.0 AND THX9421 PRESTIGE
®
IAQ WITH EIM
68-0311—02
14
Mount Thermostat on Wallplate
Align thermostat to wallplate and snap into place. See Fig. 19.
Fig. 21. Mount thermostat (THX9421).
POWER OPTIONAL REDLINK™
ACCESSORIES
1. Install batteries or power the optional RedLINK accesso-
ries.
2. If no RedLINK accessories are used, skip to “Linking
Thermostat to Equipment Interface Module (if used)”
3. If no RedLINK accessories are used and there is no EIM
or TrueZONE Wireless Adapter, skip to “Completing Ini-
tial Setup” beginning on page 17.
Outdoor Air Sensor
1. Install 2 fresh AA lithium batteries.
Fig. 22.
Portable Comfort Control
1. Install 3 fresh AA alkaline batteries.
Fig. 23.
Indoor Air Sensor
1. Install 2 fresh AAA alkaline batteries.
Fig. 24.
RedLINK™ Internet Gateway
1. Connect power cord to an electrical outlet not controlled
by a wall switch.
2. Connect ethernet cable to router and the RedLINK Inter-
net Gateway.
Fig. 25.
R
C
MCR32937
MCR32939
MCR32938
M32940