Honeywell PRESTIGE THX9321 - Manual (Page 21)

THX9321 PRESTIGE ® 2.0 AND THX9421 PRESTIGE ® IAQ WITH EIM
21 68-0311—02
Installer Options
The following options are available when you access Installer
Options. For more information on each, press Help on the
thermostat or see Table 3.
Fig. 56. Installer Options screen.
NOTE: You can use the thermostat USB port to download
all Installer Setup settings, including your com-
pany name and contact information. You can
upload this data to each thermostat you install, to
save time.
Making Changes to Installer Setup
Follow these steps to set system options after initial
installation.
NOTE: Use a USB device to save set up time. See “USB
Port” beginning on page 119 for more informa-
tion.
1. Touch Menu.
2. Select Installer Options.
Fig. 57.
3. Enter password (Date Code) and touch Done. See “Find-
ing Your Password (Date Code) to Access Installer
Options” beginning on page 20 for more information.
Fig. 58.
4. Select Create Setup.
Fig. 59.
5. Follow prompts on the screen to select the desired setup
options. See Table 4 for Installer Setup options.
Table 3. Installer Options.
Menu Item Description
Create Setup Press CREATE SETUP to set all system
settings one by one.
View/Edit
Current Setup
Press VIEW/EDIT CURRENT SETUP to
select a specific function and make quick
changes
Set Up
Diagnostics
Press SET UP DIAGNOSTICS to set up
and test Delta T diagnostics.
Installer Test Press INSTALLER TEST to quickly
determine if the heat, cool, fan and
thermostat are operating properly. Minimum
off timers are ignored during the test
Data Logs Press DATA LOGS to view the Alerts Log,
User Interactions Log, and Performance
Logs.
Wireless Device
Manager
Press WIRELESS DEVICE MANAGER to
add, remove, rename, or view the
connected wireless accessories.
Advanced
Options
Press ADVANCED OPTIONS to setup the
thermostat using a USB device or to restore
the thermostat to the factory default
settings.
NOTE: If the THX9321 has been setup
WITHOUT an Equipment Interface Module
or the TrueZONE Wireless Adapter and you
would like to add one, you must reset the
thermostat back to factory defaults.
Installer OpƟons
Done