Yokogawa Integral Oxygen Analyzer ZR202 - Manual (Page 118)

<8. Detailed Data Setting>
8-12
IM 11M12A01-02E
8.4.3 Default Values
When the analyzer is delivered, or if data are initialized, alarm and other setting defaults are as
shown in Table 8.6.
Table 8.6 Output Contact Default Settings
Item to be selected Output
contact 1
Output
contact 2
Output
contact 3
Output
contact 4
Alarm
settings
High-high limit alarm �
High limit alarm ON �
Low limit alarm ON �
Low-low limit alarm �
Calibration coefficient alarm �
Startup power stabilization
timeout alarm
�
Error ON
Other
settings
Warm-up ON �
Output range change �
Calibration ON �
Maintenance ON �
Blow back �
High limit temperature alarm �
Calibration gas press. low (default) (default) (default) �
Process upset �
Operating contact status Open Closed Closed
Closed
(fixed)
Note: Blank boxes in the above table indicate that the default is “disabled“.
8th Edition : Jan.13,2012-00