Yokogawa Integral Oxygen Analyzer ZR202 - Manual (Page 5)

iii
IM 11M12A01-02E
n For the safe use of this equipment
WARNING
EXAxt ZR is very heavy. Handle it with care. Be sure not to accidentally drop it.
Handle safely to avoid injury.
Connect the power supply cord only after confirming that the supply voltage matches the rating
of this equipment. In addition, confirm that the power is switched off when connecting power
supply.
Some sample gas is dangerous to people. When removing this equipment from the process line
for maintenance or other reasons, protect yourself from potential poisoning by using a protective
mask or ventilating the area well.
CAUTION
The cell (sensor) at the tip of the detector is made of ceramic (zirconia element). Do not drop
the detector or subject it to pressure stress.
• Do NOT allow the sensor (probe tip) to make contact with anything when installing the
detector.
• Avoid any water dropping directly on the probe (sensor) of the detector when installing it.
• Check the calibration gas piping before introducing the calibration gas to ensure that there
is no leakage of the gas. If there is any leakage of the gas, the moisture drawn from the
sample gas may damage the sensor.
• The detector (especially at the tip) becomes very hot. Be sure to handle it with gloves.
(1) About This Manual
• This manual should be passed on to the end user.
• The contents of this manual are subject to change without prior notice.
• The contents of this manual shall not be reproduced or copied, in part or in whole, without
permission.
• This manual explains the functions contained in this product, but does not warrant that those will
suit the particular purpose of the user.
• Every effort has been made to ensure accuracy in the preparation of this manual.
However, should any errors or omissions come to the attention of the user, please contact the
nearest Yokogawa Electric representative or sales office.
• This manual does not cover the special specifications. This manual may not be changed on any
change of specification, construction and parts when the change does not affect the functions
or performance of the product.
• If the product is used in a manner not specified in this manual, the safety of this product may be
impaired.
8th Edition : Jan.13,2012-00