Fault logs – Rockwell Automation 865 Differential Protection Relay User Manual
Page 25
Advertising
![background image](/manuals/577918/25/background.png)
Local Panel User Interface
2-13
865-UM001A-EN-P – July 2009
Fault
Logs
All the protection functions include fault logs. The fault log of a
function can register up to eight different faults with time stamp
information, fault values etc. Each function has its own logs (See
Figure 2.13).
Figure 2.13 – Example of Fault Log
To see the values of, for example, log two, press the ENTER key to
select the current log (log one). The current log number is then
indicated in the down-left corner of the display (See Figure 2.14,
Log2 = log two). The log two is selected by pressing the RIGHT key
once.
Figure 2.14 – Example of Selected Fault Log
Advertising