Rockwell Automation 865 Differential Protection Relay - Manual (Page 33)

Local Panel User Interface 2-21
865-UM001A-EN-P – July 2009
Parameter Setting
1. Move to the setting state of the desired menu (for example
CONF/CURRENT SCALING) by pushing the ENTER key. The
Pick text appears in the upper-left part of the display.
2. Enter the password associated with the configuration level by
pushing the INFO key and then using the arrow keys and the
ENTER key (default value is 0002). For more information about
the access levels, please refer to section “Operating Levels”.
3. Scroll through the parameters using the UP and DOWN keys. A
parameter can be set if the background color of the line is black.
If the parameter cannot be set the parameter is framed.
4. Select the desired parameter (for example Inom) with the
ENTER key.
5. Use the UP and DOWN keys to change a parameter value. If the
value contains more than one digit, use the LEFT and RIGHT
keys to shift from digit to digit, and the UP and DOWN keys to
change the digits.
6. Push the ENTER key to accept a new value. If you want to leave
the parameter value unchanged, exit the edit state by pushing the
CANCEL key.
Figure 2.20 – Changing Parameters