Setting range limits, Configuration and parameter setting (cont.) – Rockwell Automation 865 Differential Protection Relay User Manual
Page 34
Advertising
2-22
Local Panel User Interface
865-UM001A-EN-P – July 2009
Setting Range Limits
If the given parameter setting values are out-of-range values, a
fault message will be shown when the setting is confirmed with
the ENTER key. Adjust the setting to be within the allowed range.
Figure 2.21 – Example of a Fault Message
The allowed setting range is shown in the display in the setting
mode. To view the range, push the INFO key. Push the
CANCEL key to return to the setting mode.
Figure 2.22 – Allowed Setting Ranges shown in the Display
Configuration and
Parameter Setting
(cont.)
Advertising