Rockwell Automation 2094-xMxx-S Kinetix 6000 Multi-axis Servo Drives User Manual - Manual (Page 90)

90 Rockwell Automation Publication 2094-UM001H-EN-P - June 2013
Chapter 5 Connecting the Kinetix 6000 Drive System
Figure 43 - Setting the Ground Jumper (230V Series A and C IAM modules)
P17
P16
P15
Top Screw
2094-ACxx-Mxx-x
IAM Module (230V)
Bottom Screw Front Panel (opened)
Ground jumper set
for grounded configuration
(default setting).
Ground jumper set
for ungrounded configuration.
IMPORTANT Use the default jumper setting or remove the jumper entirely for grounded
power configurations. Move the jumper, as shown above, for ungrounded
power.