Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 125)

125
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Traverse
Traverse Menu
Traverse Menu
In this display, the individual functions
of the program can be called. After a
function has been performed, the
user returns to this display.
New traverse
Any data of a previous traverse in the
memory will be erased at the start of
a new traverse. To avoid
unintentional erasing, a confirmation
must be made.
The first dialog requests the entry of
the station point number, height of
instrument, station coordinates and
the setting of a specified Hz-angle.
Occupy Station
Select to occupy a station previously
measured in this traverse.
Traverse Point
Select to measure to the next
traverse station.
Sideshot Point
Select to measure to a sideshot
point.
Close Traverse
Select to compute the misclosure
data for the current traverse.
New Traverse
Select to discard any retained
information and start a new traverse.
End Program
Select to end the traverse program.
Data for the current traverse will be
retained in memory for use if the
program is restarted later.
Press to accept the currently
highlighted selection.
Start the
"CONFIGURATION".
Press this key
combination to quit the
Traverse program at any time.
Station Id
Input the Point Id of the first occupied
station in the traverse.
Trav\ Start Traverse
Station Id: Station100
Inst. Ht. : 1.635 m
Stn. East : 23541.025 m
Stn. North: 55231.177 m
Stn. Elev.: 521.358 m
Hz : 233°15’25’’
REC Hz0 IMPOR
MC
VIEW
Trav\ Traverse Menu
1 Occupy Next Station
2 Measure Traverse Point
3 Measure Sideshot Point
4 Close Traverse
5 Start Traverse
6 End program
CONT
MC
CONF QUIT