Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 38)

38
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Stakeout
Coarse Positioning
Once the coordinates of the stakeout
point have been acquired, the
program proceeds to "Coarse
Positioning".
Coarse positioning is an optional step
for approximate positioning,
preceeding the iterative stakeout
process. It may be used to direct the
rod person from the point that has
just been staked to the next point.
The "Coarse Positioning" calculates
various displacements, depending on
the selected mode.
• Line Offset
• Orthogonal
• Azimuth and Distance
If instrument is in LOCK-
mode with EDM-mode TRK/
RTRK, pressing F1: STAKE from a
Coarse Mode starts a distance
measurement.
Point Id
point Id of the point to be staked.
Azimuth
Azimuth from the station to the point
to be staked.
Horiz.Dist
Horizontal distance from the station
to the point to staked.
Elevation
Elevation of the point to be staked.
Confirms the entry and
proceeds to the Coarse
Positioning mode. Depending on the
configuration of the stakeout method,
the program may proceed to the
Stake mode.
Manual Stake allows to enter a point
given the azimuth and the distance.
The azimuth and the horizontal
distance from the station to the point
to be staked must be entered
manually.
Manual Stakout
STAKE\ Manual Entry
Point Id : 1
Azimuth : --°--'--''
Horiz.Dist: ----- m
Elevation : ----- m
STAKE
MC
QUIT