Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 209)

209
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Road+
File Checking
During the file checking process,
each file is inspected for possible
errors in the data format such as
missing or incorrect word index. If
errors are found, an error message is
displayed indicating the type of error.
During the inspection process, if any
errors are found that would cause
erroneous data to be computed and
displayed, the file checking routine
will be aborted. If this occurs, the
file(s) containing the problem must
be fixed before continuing. In addition
to checking for file errors,
geometrical components are
checked. This includes tangent
directions of adjacent elements and
chord lengths of elements. Any
deviations which exceed permitted
tolerances are displayed such as in
the following example.
Selecting the "NO" option to
override will bring up another
display that says "Continue checking
alignment ?". If you choose "NO" the
display will return to the "SELECT
ALN FILES" menu. If you choose
"YES" the program will continue to
check the files. If no other errors are
found the program will go to the
opening "Station & Offset" display.
Selecting the "YES" option to
override will cause the
program to override the error and
continue to check other files for
possible errors. If no other errors are
found the program will go to the
"Station & Offset" opening display.
Road+\ Checking Files
WARNING: 6003
ALN: Deflection tolerance
exceed at station 79.880.
Difference in directions is
0.0050. Override?
MC
YES NO