Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 256)

256
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en
1
100pr91
P1
P3
Reference Plane
Introduction
This manual describes the program
"Reference Plane" for TPS1100 Pro-
fessional series instruments.
Reference Plane first defines a
reference plane and then calculates
coordinates of points on the plane
from Hz- and V- angles. If distances
are measured, the perpendicular
deviation of the point from the plane
is also calculated.
The plane can be defined in the
instrument coordinate system or in a
"local" plane coordinate system.
Two points can be used to define a
vertical plane or 3-10 points can
define a tilted plane. With 4 or more
points, a least squares adjustment is
calculated resulting in an adjusted
plane.
Pi
P2
Pi