Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 254)

254
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Monitoring
Selected:
On/Off activates and deactivates
current point.
Ends Point Selection and
returns to previous dialog.
Display the next point in the
file.
Positions telescope to
displayed target.
Deactivate all points.
Activate all points.
Selecting the points to be measured
Select the points required for the
automatic measurement here.
Identical point numbers can be used
for different points.
MONIT\ Point Selection
5/50
Point Id : 1000
Selected : On
Hz : 281°47'05"
V : 92°15'36"
Slope Dist: 254.254 m
DONE --> POSIT
MC
NONE ALL QUIT
Simultaneously measure and
record data in the active
measurement job.
Measured point becomes selectable.
Measure a distance.
Record the measurement in
the active measurement job.
Measured point becomes selectable.
Accept the measurement.
Measured point becomes
selectable.
Quit the function after all points
have been measured; return to
the "Point Selection" menu.
Measurement menu, continued