Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 80)

80
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Remote Height
V
Vertical angle to the remote point.
Refl. Ht.
Reflector height used for the target
point.
Slope Dist.
Slope distance from the instrument
station to the base point.
Ht. Diff.
Height difference between the base
point ground and the instrument
ground.
Start the
"Configuration Editor".
Change the theodolite
face.
Exit the program.
Simultaneously measure and
record in the active
measurement job. Proceed with the
"REMOTE POINT" dialog.
Measure a distance.
Record the
measurement in the active
measurement job and proceed with
the "REMOTE POINT" dialog.
Measure the
distance. Accept the
measurement without recording.
Proceed with the "REMOTE POINT"
dialog.
Enter the target data. (see
User Manual)
Proceed with "REMOTE
POINT" dialog.
Measure Base Point, continued